EASY-Box

DICHT-FIX – 100% waterproof

Fast Installation

The time-tested DICHT-FIX waterproof system has been further developed and now provides triple sealing for concealed units.

On-wall installation. Connect the pipes.

Fix sealing fabric on ready plastered and pre-treated wall.

External waterproof – protection against splashing: the plate support protects the EASY-Box externally from splashing water. All openings are individually and reliably sealed.

Rinse pipes using a pre- assembled flushing device.

Trim the protruding part of the box, turn off the water and disassemble the flushing device.

Assemble the function unit (thermostat or single lever body) from Kit 2 and verify water- tightness.

External waterproof – sealing fleece: the sealing fabric replaces the former sealing frames and prevents water from soaking in.

Internal waterproof - inlays: additional sealings around the protruding pipes prevent any water from soaking from the EASY-Box into the wall.

Intelligent solution – squirted sealings: the plate support is manufactured in a 2-component die-casting process. Direct injection moulding ensures that the joints remain perfectly watertight.

Slide the plate support over the cartridge and the diverter and screw into the right position. Then mount the visible design parts.

Structure sealant

The most important issue, particularly for built-in installations, is to ensure that the brickwork is well sealed against water and dampness. When showering, no water should penetrate the wall e.g. through the gaps between the tiles. Therefore, the relatively large openings in the wall which hold the built-in unit’s technology must be particularly well sealed.

READY! EASY-Box combines modern design with advanced technology!

EASY-Box enables carefree showering enjoyment!

04 05