Ideal Standard Catalogue-2020-English

Materials

Technical information

Mirror&Light: Type of materials: • Framework: MFC panel class E1. • Hinges: Steel with Soft-Closing. • Hanging bracket & fixing plate: Steel. • Shelf: Glass 6 mm. • Doors: Mirror stick to MDF panel class E1. • Finishes: Mat Aluminium (AL).

BRASS FITTING MATERIALS

The taps and mixers are made of brass of constant and controlled chemical content to meet the European standards. The brass has a low lead content significantly under the norm of 1.6%. The company guarantees customers the materials high quality without risk for health.

COATINGS In order to achieve the shiny surface the company uses the proven method of electroplating . Thanks to the modern equipment there are met the European standards EN 248, DIN 50021, ISO 9927, ISO 5002 and there are achieved a high quality nickel finish of 12.6 to 15.3 μ and a chrome finish of 0.327 to 1.470 μ. All plastic details are electroplated after being previously copper plated which assures the surface durability and its aesthetic look. Powder coating is a type of finish that is applied to metal parts to create a cosmetic and durable coating. Unlike conventional liquid paint which is delivered via an evaporating solvent, powder coating is typically applied electrostatically (by spraying the powder using an electrostatic gun) and then cured under heat. This cure process requires a certain temperature and length of time in order to reach full cure and establish the full film properties for which the material was designed. Normally the powders cure at 200 °C (390 °F). All processes are factory applied under controlled, stable conditions Physical Vapor Deposition (PVD) technology is a vaporizing coating technique involving the transfer of material at an atomic level, that produces a brilliant decorative and functional finish. PVD coating processes deposit a layer of high density material that’s only a few microns thick, but once applied, the coating is nearly impossible to remove, and won’t wear off on its own. Additional benefits include:

∙ Clean, polished appearance when applied over a polished surface, ∙ Uniform, matte appearance when applied over a matte surface, ∙ Dimensional changes are minimal due to the thinness of the coating, ∙ Resists damage caused by salt and other corrosive materials, ∙ Offers a long-lasting, tough exterior that is scratch resistant, ∙ The process to apply PVD coating is completely eco-friendly.

ACRYLIC MATERIAL

The quality of acrylic bathtubs and shower trays meets the highest requirements. All stipulated specifications are strictly observed and the production and our products are certified by TÜV. The TÜV certification symbol further certifies the exclusive use of the quality acrylic material according to EN 14516: 2010 European Standards. Furthermore, the acrylic products bear the AFNOR NF certification mark. The Ideal Standard bathtubs are, therefore, synonymous to exceptional quality.

 Scratch resistance.  Chemical/ solvent element resistance.  UV resistance (does not become yellow).  Material sturdiness (does not break).  Shiny appearance: glossy texture.

Technical

information

637

Ideal Standard catalogue 2020