The Bluebook 5

Index

CI/SfB

April 2014

(74)

Uniclass L721

ideal Standard / ARMITAGE SHANKS

F

Low level WC The cistern is mounted on the wall at low level with the operating lever at hand height.

Fast fix bracket Easy to fit wall mounted bracket for bar shower valves. Saves time and cost. First fix connection kit Provides a rigid fixing foundation for built-in mixing valves on stud partition walls. Free flow waste For basins without an overflow where the taps might be left running. Prevents any chance of flooding. Flow regulator Factory fitted to save water on either the outlet of basin mixers and the inlet of pillar taps. Fixed overhead shower An overhead shower head fitted to the wall or ceiling in a fixed position. Flow restrictor A device within a basin or bath fitting which reduces water flow in order to save water. Floor Standing WC suites or bidets where the base fixes to the floor. Flush bend A flush bend is used to connect low level, back-to-wall and wall mounted WC pans to the cistern. High pressure installations Minimum of 1 bar, but is often greater. Horizontal adjustment The shower enclosure profile can be adjusted horizontally to allow for out-of-true walls. Horizontal and vertical adjustment Enclosure profile adjustment that allows for fixing into grout lines rather than onto tiles. High level WC The cistern with a pull chain is fitted on the wall at high level near the ceiling. H

I

Index

IdealClean finish Finish applied to shower enclosures so the glass is easier to clean and stays clean for longer. Idealfil Bath spout combined with pop-up waste. Hot and cold handles mounted remotely within easy reach. Idealform Baths moulded from high quality acrylic sheet - warm to the touch and gives exceptional insulation. Idealform Plus+ All the benefits of Idealform with double the reinforcement for extra strength and rigidity (no

creaking). Idealcast

Superior bath construction - the strength of cast iron with just half the weight. Minimum thickness 8mm.

L

Low pressure gravity fed system Gravity fed hot water depends on the height of the cold water tank (usually in the loft).

M

Multiport Delivers reliable, efficient water flow on low pressure systems - also available for 1 hole bath fillers. Manual Mixer Shower Does not compensate for variations in hot and cold water flow rate, pressure or temperature. Mixer fittings Hot and cold water are mixed in the body of the fitting and delivered through a single spout.

5 : 18 : 1 : 3

Tel 0870 122 8822 Fax 0870 122 8282 Email info@thebluebook.co.uk Online search, specify & CAD: www.thebluebook.co.uk